Solar Power System ,Hybrid Solar System

10KW 48V Hybrid Inverter, Built-in MPPT Solar Controllers, Max 180A Battery Charging, AC Input/Output 120V/240V(settable),Pure Sine Wave Inverter(Parallel/WiFi/BMS COMM) .

Rated Output Power	10.3KW
Rated Voltage	51.2V
Nominal Capacity	560Ah
Rated Energy	28.67KWh
Battery Type	Lithium Iron Phosphate Battery
AC Input	165-280VAC 50/60Hz 120-280VAC 50/60Hz（Configurable）
Inverter Mode Output	220VAC+2%/230VAC+2%/240VAC+2%，50/60Hz+0.5%
Maximum Photovoltaic Input Power	12KW
Solar Input Voltage Range	80V-450VDC
Maximum Photovoltaic Input Current	180A
Maximum AC Input Current	120A
Maximum Total Input Current	180A
Operating Temperature	—10-50℃
Storage Temperature	—15-60℃
Humidity	0%-95%, non-condensing
Product Size	470*528*1172±5mm

Applications

This product is suitable for home emergency, remote areas with insufficient power supply, rural areas and farms, disaster relief and emergency, small commercial and industrial facilities, off-grid tourist facilities, areas with high power costs, remote monitoring and control stations, etc.

Product advantages

1. 10KW solar inverter

This is a solar inverter with both single-phase and split-phase functions. It is a new type of solar energy storage inverter control inverter that integrates solar energy storage and mains charging and energy storage, with AC sine wave output. It adopts DSP control and has the characteristics of fast response speed, high reliability and industrial standards through advanced control algorithms.

2. Lithium iron phosphate power battery

Built-in multiple lithium batteries with a maximum storage capacity of 28.67kWh, suitable for small families. 560Ah lithium iron phosphate (LiFePO4) battery can be charged and discharged for 6000+ deep cycles, which is 3 times longer than lead-acid batteries. Built-in 180A BMS can prevent overcharging, over-discharging, charging overcurrent, discharging overcurrent, short circuit, battery voltage self-balancing, and high-temperature discharge cutoff. Compared with ordinary batteries, it has higher energy density and longer cycle life, is compatible with various electrical and digital devices, and provides long-lasting power supply.

3. BMS Intelligent Lithium Battery Management System

BMS can monitor the voltage, temperature and current of the battery in real time to prevent problems such as overcharging, over-discharging, overheating and short circuit that may cause safety hazards. It can automatically adjust the working state of the battery when an abnormality is detected to reduce the risk of fire or explosion. By balancing the voltage of each battery cell, BMS can prevent the battery cells from aging prematurely due to uneven voltage, thereby extending the service life of the entire battery pack. Reasonable charge and discharge management can also reduce the number of cycles and deep discharge of the battery, further extending the life. It is very suitable for off-grid standby and self-powered use. It is widely used in homes, cabins, campers, RVs, etc., and can be used as a backup power source when the power grid is out of power. 

4. Charging/AC output mode

4 AC output modes: public priority output, solar and public hybrid output, solar priority output, inverter priority output. 4 battery charging modes: hybrid charging, public priority charging, solar priority charging, solar charging only

5. Customize various photovoltaic energy storage applications

Photovoltaic energy storage systems are widely used in residential, commercial, agricultural and smart city scenarios by providing self-sufficient electricity, reducing electricity costs and supporting remote areas and emergency needs.