Solar Power System ,Hybrid Solar System

4.3KW/6.3KW/10.3KW Hybrid Inverter, Built-in MPPT Solar Controllers, Max 120A Battery Charging, AC Input/Output 120V/240V(settable),Pure Sine Wave Inverter(Parallel/WiFi/BMS COMM) .

Product Model	SLMHG-7KWH	SLMHG-14KWH	SLMHG-28KWH
Inverter Output Power	4.3KW	6.3KW	10.3KW
Rated Voltage	25.6V	51.2V560	51.2V
Rated Capacity	280AH		560AH
1	7.17KWH	14.34KWH	28.67KWH
AC Input	165-280VAC 50/60HZ 120-280VAC 50/60HZ（Configurable）
Inverter Mode Output	220VAC+2%/230VAC+2%/240VAC+2%，50/60HZ+0.5%
Photovoltaic Charging Power (MAX)	5KW	7KW	12KW
Photovoltaic Input Voltage Range	40V-450VDC	80V-450VDC	80V-450VDC
Photovoltaic Input Current（MAX）	18A	22A	180A
Photovoltaic Charging Current（MAX）	150A	120A	120A
AC Charging Current（MAX）	100A	80A	180A
Charging Current（MAX）	150A	120A	180A
Operating Temperature	0-40℃
Storage Temperature	-15-45℃
Relative Temperature	-10-90℃
USB Output	5V/2A
Type-C Output	5V/3A,9V/2A
DC 5521	12V 10A(MAX)
AC Socket	220V 13A(MAX)
Size	370360635mm	390380820mm	4755301190mm
Weight	70kg	122kg	280kg

Applications

This product is suitable for home emergency, remote areas with insufficient power supply, rural areas and farms, disaster relief and emergency, small commercial and industrial facilities, off-grid tourist facilities, areas with high power costs, remote monitoring and control stations, etc.

Product advantages

1. 4.3KW—10.3KW Solar Inverter

This is a solar inverter with both single-phase and split-phase functions. It is a new type of solar energy storage inverter control inverter that integrates solar energy storage and mains charging and energy storage, with AC sine wave output. It adopts DSP control and has the characteristics of fast response speed, high reliability and industrial standards through advanced control algorithms.

2. Lithium Iron Phosphate Power Battery

Built-in multiple lithium batteries with a maximum storage capacity of 28.67KWh, suitable for small families. 280Ah/560Ah lithium iron phosphate (LiFePO4) battery can be charged and discharged for 6000+ deep cycles, which is 3 times longer than lead-acid batteries. Built-in 120A BMS can prevent overcharging, over-discharging, charging overcurrent, discharging overcurrent, short circuit, battery voltage self-balancing, and high-temperature discharge cutoff. Compared with ordinary batteries, it has higher energy density and longer cycle life, is compatible with various electrical and digital devices, and provides long-lasting power supply.

3. BMS Intelligent Lithium Battery Management System

BMS can monitor the voltage, temperature and current of the battery in real time to prevent problems such as overcharging, over-discharging, overheating and short circuit that may cause safety hazards. It can automatically adjust the working state of the battery when an abnormality is detected to reduce the risk of fire or explosion. By balancing the voltage of each battery cell, BMS can prevent the battery cells from aging prematurely due to uneven voltage, thereby extending the service life of the entire battery pack. Reasonable charge and discharge management can also reduce the number of cycles and deep discharge of the battery, further extending the life. It is very suitable for off-grid standby and self-powered use. It is widely used in homes, cabins, campers, RVs, etc., and can be used as a backup power source when the power grid is out of power.

4. Charging/AC Output Mode

4 AC output modes: public priority output, solar and public hybrid output, solar priority output, inverter priority output. 4 battery charging modes: hybrid charging, public priority charging, solar priority charging, solar charging only.