Solar Energy System
Photovoltaic Inverter
Lithium Battery
Solar Panel
Solar Energy Equipment
Accessories
10KW 48V Hybrid Solar Inverter with MPPT, Pure Sine Wave, AC 120V/240V - China Suppliers & Factory
10KW 48V Hybrid Inverter, Built-in MPPT Solar Controllers, Max 180A Battery Charging, AC Input/Output 120V/240V (settable), Pure Sine Wave Inverter (Parallel/WiFi/BMS COMM).
| Rated Output Power | 10.3KW |
| Rated Voltage | 51.2V |
| Nominal Capacity | 560Ah |
| Rated Energy | 28.67KWh |
| Battery Type | Lithium Iron Phosphate Battery |
| AC Input |
165–280VAC 50/60Hz 120–280VAC 50/60Hz (Configurable) |
| Inverter Mode Output | 220VAC±2% / 230VAC±2% / 240VAC±2%, 50/60Hz±0.5% |
| Maximum Photovoltaic Input Power | 12KW |
| Solar Input Voltage Range | 80V–450VDC |
| Maximum Photovoltaic Input Current | 180A |
| Maximum AC Input Current | 120A |
| Maximum Total Input Current | 180A |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -15 to 60°C |
| Humidity | 0%–95%, non-condensing |
| Product Size | 470 × 528 × 1172 ±5mm |
This product is suitable for home emergency, remote areas with insufficient power supply, rural areas and farms, disaster relief and emergency, small commercial and industrial facilities, off-grid tourist facilities, areas with high power costs, remote monitoring and control stations, etc.
This is a solar inverter with both single-phase and split-phase functions. It is a new type of solar energy storage inverter that integrates solar energy storage and mains charging and energy storage, with AC sine wave output. It adopts DSP control and has the characteristics of fast response speed, high reliability and industrial standards through advanced control algorithms.
Built-in 180A BMS can prevent overcharging, over-discharging, charging overcurrent, discharging overcurrent, short circuit, battery voltage self-balancing, and high-temperature discharge cutoff. Compared with ordinary batteries, it has higher energy density and longer cycle life, is compatible with various electrical and digital devices, and provides long-lasting power supply.
BMS can monitor the voltage, temperature and current of the battery in real time to prevent problems such as overcharging, over-discharging, overheating and short circuit that may cause safety hazards. It can automatically adjust the working state of the battery when an abnormality is detected to reduce the risk of fire or explosion. By balancing the voltage of each battery cell, BMS can prevent the battery cells from aging prematurely due to uneven voltage, thereby extending the service life of the entire battery pack. Reasonable charge and discharge management can also reduce the number of cycles and deep discharge of the battery, further extending the life. It is very suitable for off-grid standby and self-powered use. It is widely used in homes, cabins, campers, RVs, etc., and can be used as a backup power source when the power grid is out of power.
4 Battery Charging Modes: Hybrid charging | Public priority charging | Solar priority charging | Solar charging only
Photovoltaic energy storage systems are widely used in residential, commercial, agricultural and smart city scenarios by providing self-sufficient electricity, reducing electricity costs and supporting remote areas and emergency needs.
